KCR Drip Torch 100-00

Light controlled burns safely with the KCR Drip Torch. A favorite among the U.S. Forestry Service, the KCR Drip Torch is the most popular backfire drip torch.

A fuel trap on the spout of the KCR Drip Torch prevents flashback into the fountain. A check valve in the cover doubles the flashback protection. The KCR Drip Torch also features a breather valve, oil proof gaskets and sealed bullets to keep fuel flowing. The KCR drip torch can use diesel or stove oil.

The KCR Drip Torch has a capacity of 1.25 gallons and features a 15 gauge seamless aluminum fountain, a double bottom and a full length handle. The KCR Drip Torch weighs 5 and half pounds.

Drip Torch Specifications

• This Drip Torch is designed for use in igniting fires in vegetation with a mixture of diesel fuel and gas.
• Drip Torch Lightweight Aluminum tank and handle assembly.
• Flat bottom on drip torch to prevent tipping.
• Steel siphon tube.
• Drip Torch Tank capacity 1-1/4 gallons.
• Drip Torch Tank is 6" diameter.
• Spout/Igniter assembly can be stowed inside of the fuel tank when drip torch is not in use.
• Fuel trap in the spout and check valve assembly in the tank cover provides flashback protection.
• Breather valve assembly provides smooth flow of fuel when drip torch is in use.

Receive a volume discount on this drip torch if you buy 5 or more drip torches. Click on "Buy in Bulk and Save" for details.

Drip Torch Operating Instructions - as supplied by the manufacturer - KCR Manufacturing
CAUTION: Use of fire lighting equipment should be restricted to trained, experienced personnel, who will take precautions to avoid endangering themselves and others' property and safety. Keep torch in good operating condition, inspect periodically and replace worn or missing parts. Handle all petroleum products with the same precautions as when handling gasoline!

Fuel: See your agency's or bureau's policy for authorized fuel mixtures.

Starting: Fill the drip torch, leaving a 2" air space at the top. This will allow for expansion. Do not fill near open flame or other ignition source. Wipe off outer surface of the tank and handle after filling. Remove discharge plug (100-81) and insert in blind socket. Open breather valve approximately 2 full turns. Tip drip torch forward, allowing fuel to wet ignitor. Light igniter, drip torch is ready to use.

Storing and proper closure: CAUTION: ALLOW THE IGNITER TO COOL PRIOR TO STORAGE: Stand the drip torch upright until the igniter burns out and cools to room temperature. After the igniter cools, remove the lock ring, reverse the spout and return it to the inside of the tank. Screw on the lock ring securely. Tighten lock ring by hand until snug and then turn an additional 1/4 turn. Drip torch should be stored securely in a mounted bracket designed for this purpose.

CARRY AND STORE YOUR DRIP TORCH WITH THE SAME CARE YOU WOULD GIVE TO ANY FUEL TANK.